Monday, January 31, 2022

SpaceX - CSG-2 - Jan. 31, 2022

  SpaceX Falcon Block 5 - CSG-2 - Launched January 31, 2022

Screenshot from SpaceX Webcast of the launch of CSG-2 at sunset

Mission Rundown: SpaceX Falcon 9 Block 5 - CSG-2 

Written: August 8, 2022

Lift Off Time

January 31, 2022 - 23:11:14 UTC - 18:11:14 EST

Mission Name

CSG-2 - Cosmo-Skymed Second Generation FM2

Launch Provider

SpaceX

Customer

Italian Space Agency (Agenzia Spaziale Italiana)

Rocket

Falcon 9 Block 5 serial number B1052-3

Launch Location

Space Launch Complex 40 - SLC-40

Cape Canaveral Space Force Station, Florida

Payload

SAR Earth Observation Satellite - Thales Alenia Space 

Payload mass

2 230 kg ~ 4 920 pounds

Where did the satellite go?

Sun-Synchronous Polar Orbit - 616 km x 619 km x 97,86°

Will they be attempting to recover the first stage?

Yes - 1st stage will perform a Boost Back Burn

Where will the first stage land?

LZ-1 at Cape Canaveral Space Force Station, Florida

Will they be attempting to recover the fairings?

Yes. Recovery ship Bob will salvage the fairings 596 km downrange north of Cuba

Are these fairings new?

No. Type 3.2 fairing on 4th flight with 4x2 venting ports, thermal steel tip, lowered protrusion and acoustic tiles 

This will be the:

Booster B1052 is flying on its third flight as a single stick Falcon 9 rocket on this 17th maiden flight in the Falcon 9 booster fleet.


Booster B1049 is supplying B1052 with its interstage, so it can replace B1049.

– 138th flight of all Falcon 9 rockets

– 82nd flight of Falcon 9 Block 5 rocket

– 17th maiden flight of Falcon 9 Block 5 rocket

– 79th SpaceX launch from SLC-40

– 103rd booster landing overall

– 4th mission for SpaceX in 2021

Where to watch

Where to read more in depth

SpaceX YouTube link - Everyday Astronaut link

Want to know or learn more link ask Tim Dodd


Launch debriefing

(This is what happens)

1st Stage went almost sideways after MECO gaining little height

Horizontal velocity by 1st stage is usually 7000 km/h after MECO

Boost Back Burn cut that back with -8000 km/h

2nd stage went into a 226x631 km orbit

Jumps in telemetry is acquisition/loss of signal

-

T-00:12:13

Host:

T 00:00:00

T+00:01:15

T+00:02:21

T+00:02:32

T+00:02:36

T+00:03:53

T+00:04:07

T+00:06:15

T+00:07:21

T+00:08:51

-

T+00:55:18

T+00:56:06

-

T+01:00:10

T+01:00:32

-

-

-

Pre Launch Run Down from 3:17 then Q&A

SpaceX live feed at 19:00

Jessica Anderson in Hawthorne Mezzanine Studio

Liftoff at 31:13 - 23:11:14 UTC

MaxQ at 32:28

MECO 33:34, stage separation 33:38

SES-1 at 33:45 - ground camera view

Boost back burn 3 Merlin 1D# at 33:49 for 42 seconds

Faring separation at 35:06

1st stage apogee at 35:20 - 1 162 km/h at 129 km

Entry burn 37:28 by 3 Merlin 1D# for 20 seconds

Landing burn 38:34 by 1 Merlin 1D# for 33 seconds

SECO at 40:04 and coasting

Q&A with explanations from 42:08

SpaceX resumes live feed at 1:26:32

SES-2 - SECO-2 at 1:27:19 in 3-4 seconds gave a velocity boost from 27 057 km/h to 27 452 km/h

SpaceX shows deployment at 1:31:24

Rap up from SpaceX at 1:31:46

Q&A, explanations and replay from 1:40:35

launch day offer on merchandise at 1:58:23

Rap up from Tim Dodd at 1:59:54



How about watching a Rocket fly by?

SpaceX Falcon 9 will on January 31, 2022 be attempting to launch the Cosmo-Skymed Second Generation 2 (CSG-2) satellite to a Sun-Synchronous orbit for the Italian Space Agency, a part of the European Space Agency. The Falcon 9 Block 5 Booster B1052-3 will lift off from Space Launch Complex 40 (SLC-40) and a few minutes later perform a boostback burn to return to land and touchdown on Landing Zone 1 (LZ-1).

The launch used a flight-proven Falcon 9, with the booster – B1052-3 – having previously flown twice as a Falcon Heavy side booster. It was previously part of the Falcon Heavy vehicles that launched Arabsat-6A in April 2019 and STP-2 in June of the same year.

B1052-3 has a history as a Falcon Heavy side booster that has been refitted as a single launch vehicle. After 950 or so days it was decided to let it back in rotation so it wouldn’t be technically obsolete with too much dust in sensible parts of its hardware.

B1052-3 will technically have made its maiden flight - Maid 17 - as a single stick booster even if it’s the third flight after launching the following missions:

Arabsat-6A

FH2 April 11, 2019

CSG-2

January 31, 2022

STP-2

FH3 June 25, 2019



B1052-3 performed a static fire test 16:00 EST Jan. 23 after refurbishment and waiting for an east coast launch out of the Cape. SpaceX has omitted this safety precaution many times so far. It is not required to perform a static fire test inhouse missions like Starlink, that was to save money and time before the launch.

SpaceX is the first entity ever that recovers and reflies its fairings. After being jettisoned, the two fairing halves will use cold gas thrusters to orientate themselves as they descend through the atmosphere. Once at a lower altitude, they will deploy drogue chutes and parafoils to help them glide down to a soft landing for recovery.

Falcon fairings halfs have been recovered and reused since 2019. Improved design changes and overall refurbishment procedures have decreased the effects of water landings and led to an increased recovery rate of fairings.

The fairings are a used pair from 5 previous missions with one joint mission. Both fairings survived the landing. The active fairing supported 3 missions. The passive fairing half were also on 3 missions. The joint mission was Transporter-2. Active fairings are equipped with four pushrods to separate the two fairings halfs.

Fairings used to have evenly spaced venting ports that have been redesigned a number of times by having first ten, then eight and now having their venting ports built as close pairs along the fairing edge. This prevents saltwater from the ocean from flooding and sinking the fairing, and makes refurbishment toward the next flight easier.

There are two models: Type 3.1 fairing with 4x2 venting ports, thermal steel tip, lowered protrusion and no acoustic tiles and the Type 3.2 with payload protecting acoustic tiles.

After lift off from Space Launch Complex 40, SLC-40, Falcon 9 took a southward trajectory in a slight turn - a Yaw - as it climbed through the atmosphere. The first stage’s nine Merlin-1D engines cut off around the T+2 minutes 30 seconds mark, with stage separation and a 1st stage 150° flip maneuver following within seconds after MECO.

The second stage continued CSG-2’s journey to orbit while the first stage performed a 42 second long boost back burn to put it on a course back to the launch site.

Unlike most recent Falcon 9 launches from Florida, the CSG-2 flight’s booster did not need a drone ship sent out to the Atlantic to recover it. Instead it flew a return to launch site (RTLS) profile, with the booster touching down on the concrete pad at Landing Zone 1 (LZ-1) back at the Cape.

After the boostback burn was completed, B1052-3 positioned itself for atmospheric entry before conducting an entry burn to protect the stage from excess heating — fighting fire with fire — by slowing the stage down. The final landing burn began shortly before touchdown, slowing the booster to a soft landing at LZ-1.

The Payload

The Cosmo-Skymed Second Generation 2 (CSG-2) is a Earth observation satellite that will be accompanying the original COSMO-SkyMed (CSK) constellation 180 degrees from the CSG-1 satellite. The CSG system aims to provide data to both civilian and military customers. CSG-2 has a design life of seven years with an additional two years built into its timeline. The second generation satellites also have improvements over the original constellation to meet customer’s needs.

The COSMO-SkyMed satellites have provided much useful data after natural disasters, including this month’s eruption of the Hunga Tonga volcano in the South Pacific. They have also assisted in the response to the 2008 Cyclone Nargis landfall in Myanmar, landslides after Typhoon Talas in Japan in 2011, the Nepal earthquake of 2015, the central Italy earthquakes of 2016, and many more events.

CSG-2 and accompanying second generation satellites have no new instruments on board. Instead, they are duplicates of the CSK satellites, which have been operating for close to a decade, with upgraded instruments.

One of the most critical and largest instruments is the Synthetic Aperture Radar (SAR). While also being featured on the original CSK satellites, the CSG satellites now hold a more powerful and advanced SAR. Those improvements include a higher image resolution as well as single or dual polarization modes. SAR images in the X-band allowing for cloud penetration enabling ground coverage in nearly any weather.

Another overall improvement is the more simple delivery to customers. Most changes have been made to onboard hardware. A newly designed Payload Data Handling and Transmission (PDHT) instrument now has double the onboard storage capacity, double the transmission rate of space to ground data, and an increased data reception rate from SAR.

With the addition of these upgrades, the ground equipment necessary to receive data will also be upgraded to operate with both CSK and CSG satellites. CSG satellites are a part of a larger constellation with the SAOCOM system. SAOCOM satellites operate in the L-band. Learn more about the latest SAOCOM launch here: SAOCOM-1B | Falcon 9 Block 5.

CSG-2 satellite in the Thales Alenia Space anechoic chamber during a load bearing stress test.

The 4 foot release ring should be strong enough to hold the satellite horizontal without something getting stuck, bending or breaking on the CSG satellite. The white payload holder can hold the CSG satellite in any angle and rotate it as well while the noise and EMC radiation mast bombarde it with for humans deadly doses of electromagnetic radiation.


Author; Austin Desisto link,  Trevor Sesnic link

Coauthor/Text Retriever Johnny Nielsen

link to launch list


Tuesday, January 18, 2022

SpaceX - Starlink V1.5 Group 4-6 - Jan 18/19, 2022

  SpaceX Falcon 9 Block 5 - Starlink V1.5 Group 4-6 - Launching January 18/19, 2022

Screenshot from SpaceX Webcast of the launch of Starlink V1.5 Group 4-6

Mission Rundown: SpaceX B5 - Starlink V1.5 Grp. 4-6

Written: July 21, 2022

Lift Off Time

January 19, 2022 - 02:02:40 UTC

January 18, 2022 - 21:02:40 EST

Mission Name

Starlink V1.5 Group 4-6

Launch Provider

SpaceX

Customer

SpaceX

Rocket

Falcon 9 Block 5 serial number B1060-10

Launch Location

Launch Complex 39A - LC-39A

Kennedy Space Center, Florida

Payload

49 Starlink V1.5 Satellites x 306 kg

Payload mass

15 000 kg ~ 33 100 pounds

Where are the satellites going?

Low Earth Orbit - 210 km x 339km x 53.22° - After testing to Starlink Shell 4’s operational orbit - 540 km

Will they be attempting to recover the first stage?

Yes - ASOG were towed downrange

Where will the first stage land?

A Shortfall of Gravitas located 654 km southeast

Will they be attempting to recover the fairings?

Yes - Doug will recover both fairings from the water ~ some 664 km downrange at Bahamas

Are these fairings new?

No, both fairing halfs flew on one previous mission

This will be the:

Of 81 flights with Falcon 9 Block 5 rockets, 16 of them have been maiden flights.

Of 56 flights with Falcon 9 before Block 5 rockets, 14 of them were reflown twice.

Two Falcon 9 boosters were reflown as Falcon Heavy Flight 1 side boosters.

– 137th flight of all Falcon 9 rockets

– 79th re-flight of all Falcon 9 boosters

– 81st flight of Falcon 9 Block 5 rocket

– 65th re-flight of Block 5 booster

– 5th launch to Starlink Shell 4

– 43rd SpaceX launch from LC-39A

– 102nd booster landing overall 

– 3rd mission for SpaceX in 2022

Where to watch

Where to read more

SpaceX YouTube link

Want to know more link ask Tim Dodd


Launch debriefing

(This is what happend)

T -00:12:18

Host:

T   00:00:00

T +00:01:15

T +00:02:36

T +00:02:46

T +00:02:58

T +00:04:38

T +00:06:51

T +00:08:24

T +00:08:58

T +00:10:13

T +00:15:37

T +01:21:15

T +00:45:00

SpaceX video feed starts at 05:12

Youmei Zhou on night flight duty

Liftoff at 17:30

MaxQ at 18:45 - call out

MECO 20:05, stage separation 20:09

SES-1 at 20:16 - Course changing dogleg

Fairing separation at 20:28

1st stage apogee at 22:07 - 6 793 km/h at 132 km

Entry burn 24:20 by 3 Merlin 1D# for 20 seconds

Landing burn 25:54 by 1 Merlin 1D# for 25 seconds

SECO-1 at 26:27 into a circular orbit

Rap up from 27:42

Deployment of 4-6 - 02:18:16.800 UTC

Starlink deployment confirmed - Mission Control

Both fairings recovered from the ocean


Throw another leg around Bahama

SpaceX’s Starlink Group 4-6 mission successfully launched 49 Starlink satellites on a Falcon 9 rocket. The Falcon 9 lifted off from Launch Complex 39A (LC-39A), at the Kennedy Space Center, in Florida, United States. Starlink Group 4-6 marked the 34th operational Starlink mission, boosting the total number of Starlink satellites launched to 2,042, of which 1,884 are still in orbit around the Earth. Starlink Group 4-6 marked the fifth launch to the fourth Starlink shell.

It’s launching Wednesday January 19, 2022 at 21:49 EST, from Launch Complex 39A (LC-39A). Starlink V1.5 Group 4-6 first stage booster B1060-10 will land on ‘ASOG’ - A Shortfall Of Gravitas around eight minutes after liftoff.

After boosting the second stage along with its payload towards orbit, the first stage will perform a 20 second re-entry burn to slow the vehicle down in preparation for atmospheric reentry. The booster will then perform a 20 second landing burn aboard SpaceX’s autonomous spaceport drone ship.

SpaceX will also recover both fairing halves near the Abacos Islands in the Bahamas in the Atlantic Ocean with recovery vessel Doug, named after Demo-2 Astronaut Doug Hurley.

B1060-10 will have made its tenth flight after launching the following missions:

GPS III SV03

June 30, 2020

Starlink V1.0 L22

March 24, 2021

Starlink V1.0 L11

September 3, 2020

Starlink V1.0 L24

April 29, 2021

Starlink V1.0 L14

October 24, 2020

Transporter-2

June 30, 2021

Türksat-5A

January 8, 2021

Starlink Group 4-3

December 2, 2021

Starlink V1.0 L18

February 4, 2021

Starlink Group 4-6

January 19, 2022

B1060-10 did not perform a static fire test after refurbishment and waiting for an east coast launch out of the Cape. SpaceX has since Starlink V1.0 L08 omitted this safety precaution sixteen times so far. It is not required to perform a static fire test inhouse missions like Starlink, that was to save money and time before the launch. 

SpaceX is the first entity ever that recovers and reflies its fairings. After being jettisoned, the two fairing halves will use cold gas thrusters to orientate themselves as they descend through the atmosphere. Once at a lower altitude, they will deploy drogue chutes and parafoils to help them glide down to a soft landing for recovery.

The fairings are a used pair from 2 previous missions. Both fairings survived the landing. The active fairing supported one mission. No information on the passive fairing mission. Active fairings are equipped with four pushrods to separate the two fairings.

Fairings have evenly spaced venting ports that have been redesigned a number of times by having first ten, then eight and now having their venting ports built as close pairs along the fairing edge. This prevents saltwater from the ocean from flooding and sinking the fairing, and makes refurbishment toward the next flight easier.

The Payload

SpaceX plans to offer “better than nothing” service in North America by the end of 2020 and estimates that once complete, its venture will make $30-50 billion annually. The funds from which will, in turn, be used to finance its ambitious Mars program.

To achieve initial coverage, SpaceX plans to form a net of 12,000 satellites, which will operate in conjunction with ground stations, akin to a mesh network.

Furthermore, the company recently filed for FCC permission on an additional 30,000 spacecraft, which, if granted, could see the constellation amount to a lucrative 42,000. This would octuple the number of operational satellites in earth orbit, further raising concerns about the constellations' effect on the night sky and earth-based astronomy.

For more information on Starlink, watch the Real Engineering video listed below.

Each Starlink V1.0 satellite is a compact design that used to weigh 260 kg. SpaceX developed them to be a flat-panel design to fit as many satellites as possible within the Falcon 9’s 5.2 meter wide payload fairing. 60 satellites were fitted into a dispenser affixed to the second stage.

Each Starlink V1.5 satellite still has a compact design and now has a mass of 306 kg with room for only 53 Starlink V1.5 satellites. The Starlink V1.5 satellites being launched are equipped with an inter-satellite laser communication system. This allows the satellites to communicate directly with each other, eliminating the need for costly ground stations.

The entire Starlink payload weighs around 15,600 kg. That’s near the limit that a Falcon 9 can lift into LEO and still have enough propellant for landing.

Starlink also features a SpaceX built and designed star track navigation system to enable precision placement of broadband throughput.

Four inter-satellite laser links (ISLLs) allow high-speed communication between Starlink satellites. SpaceX placed two ISLLs on the front and rear of the satellite to talk with Starlink satellites in the same orbital plane. They remain fixed in position. Two ISLLs on the satellite’s sides track other Starlink satellites in different orbital planes. This means they have to move to track the other satellites.

Starlink Orbit Plans

The first 29 launches of one testbed Starlink mission and 28 operational Starlink missions V0.9 L0 - L28 V1.0 brought the number of launched Starlink satellites to 1665. How many that still work’s, or are in orbit, are mentioned in this old article.

The Group 4-6 flight with 49 of SpaceX’s Starlink V1.5 internet satellites, which will now join the 202 Starlink V1.5 satellites already in orbit. Of the V1.0 satellites that have been launched prior to this launch, some have either as designed destructively reentered, or after encountering issues after launch, still leaving 1659 Starlink V1.0 satellites.

Spreading the wings of individual Starlink satellites in their orbit tracks - Graphic by Ben Craddock

Of the 60 v0.9 satellites launched in 2019, 46 have reentered by now to date, 6 are still under some control with the remaining 8 either actively deorbiting or naturally decaying. The Tintin and v0.9 satellites will not be in the operational Starlink satellite constellation. These pre-satellites lack the communications payload needed for full operation.

SpaceX will assign 18-20 Satellite Vehicles to each of three adjacent orbital planes. Orbital planes are to satellites as tracks are to trains – they are orbits parallel to each other designed to maximize area coverage while minimizing the number of satellites required.

Since early-December 2020, SpaceX has been altering the spacing of the satellites already on orbit.  It appears the company is arranging many of the planes to have 18 active satellites instead of 20, which would fill some small gaps and free up some satellites to act as spares. There will eventually be 72 planes of 22 satellites each in the initial Shell 1 of the Starlink constellation.

Look for an Animation by Ben Craddock for NASASpaceflight showing the movements of Starlink satellites into their orbital planes since August 1, 2020. The satellites from each launch split into three groups that each formed a plane.

Just a little peak in the current Starlink orbit mesh, it’s still a work in progress - small gabs does it

SpaceX plans to begin offering Starlink service to Canada and the northern United States later this year. Near global coverage is expected to start next year. Pricing has not been made public, but it has been hinted that speeds up to one gigabit may be possible.

Having now filled 18 evenly spaced planes in the constellation, SpaceX should be attaining continuous coverage in the northern U.S. and southern Canada areas where they intend to launch the Starlink service. SpaceX are now working on filling up to 72 evenly spaced planes in the constellation.

Starlink Phase 1 Orbital Shells

The first orbital shell of Starlink satellites will consist of 1,584 satellites in a 53° 550 km low-Earth orbit. This is the shell that SpaceX is currently filling, and it is expected that this shell will be complete by June 2021. Once complete, the first shell will provide coverage between roughly 52° and -52° latitude (~80% of the Earth’s surface), and will not feature laser links until replacement satellites will launch sometime after 2021.

Completed - The surviving operational Starlink V1.0 are now using a few months to reach operational orbits in 72 planes with 22 Satellite Vehicles in each plus spares. This shell is currently near completion, with occasional satellites being replaced.

The Starlink’s second shell will host 720 satellites in a 70° 570 km orbit. These satellites will significantly increase the coverage area, which will make the Starlink constellation cover around 94% of the globe. SpaceX will put 20 satellites in each of the 36 planes in the second shell. This shell is currently hosting 51 Starlink V1.5 Satellites.

The third shell will consist of 348 satellites in a 97.6° 560 km orbit. SpaceX deployed 10 laser link test satellites into this orbit on their Transporter-1 mission to test satellites in a polar orbit. SpaceX launched an additional 3 satellites to this shell on the Transporter-2 mission. Satellites deployed in this orbit will have inter-satellite laser link communication. Shell three will have six orbital planes with 58 satellites in each plane.

The fourth shell will consist of 1,584 satellites in a 540 km 53.2° LEO. This updated orbital configuration will slightly increase coverage area and will drastically increase the bandwidth of the constellation. This shell will also consist of 72 orbital planes with 22 satellites in each plane. This shell now holds 251 Starlink V1.5 satellites.

The fifth final shell of phase 1 of Starlink will host 172 satellites in another 97.6° 560 km low-Earth polar orbit. Shell 5 will also consist purely of satellites with laser communication links; however unlike shell four it will consist of four orbital planes with 43 satellites in each plane.

Ion Drive with Krypton gas

Innovative ion propulsion technology keeps these satellites in the correct position while on orbit. They use ion Hall-effect thrusters to achieve their working orbit. Each Starlink satellite incorporates an autonomous collision avoidance system. It uses the Department of Defence’s debris tracking data to avoid colliding with space debris or other satellites.

Starlink’s low altitude also allows SpaceX to easily deorbit malfunctioning satellites, even if their engines fail. Although 100 km is commonly described as the upper limit of Earth’s atmosphere, there is no “hard barrier”. Even at 550 km altitude, there is still a slight amount of atmospheric drag pulling the satellites down. Each satellite’s onboard ion Hall-effect thruster engine is powerful enough to keep it in orbit, but if the engine fails, it will fall back to Earth within about a year. Read about the Hall-effect thruster engine here.

The minuscule atmospheric drag in low Earth orbit will help ensure that dead satellites don’t stay in orbit for long. This will help reduce the amount of space debris in orbit, which is rapidly becoming a major concern.

Starlink Satellite Constellation

Constellations use multiple satellites working in conjunction for a common purpose. SpaceX plans eventually to form a network of about 12,000 satellites. They will operate roughly 4,400 satellites using Ku- and Ka-band radio spectrum, and almost another 7,500 satellites in the V-band.

To achieve initial coverage, Starlink will use 72 orbital planes, angled at 53 degrees from the Earth’s equator at an altitude of 550 km. They will put 22 satellites into each of these orbital planes, totaling 1,584 satellites. They will communicate with other Starlink satellites and with ground stations, akin to a mesh network.

In late 2019, the company asked the American Federal Communications Commission (FCC) for permission to launch an additional 30,000 satellites into orbits ranging from 328 km to 580 km in altitude. If the FCC okays the request, the constellation could grow to 42,000 satellites. This would increase the number of operational satellites in Earth orbit by at least a factor of 20 from pre-2019 levels.

The constellation’s large numbers are raising concerns regarding their effect on the night sky and Earth-based astronomy. However, Elon Musk stated that he is confident that SpaceX can mitigate light pollution issues and is working with industry experts to minimize the potential for any impact. Future Starlink satellites will use a sunshade that is a patio-like umbrella to reduce light reflectivity.

As was the case with a single Starlink satellite on the V1.0 L7 mission (launched on June 4), all Starlink satellites that will launch on subsequent missions “L8 - L28” going forward will feature a sun shade or visor, which will assist in blocking sunlight from reflecting off the majority of the spacecraft body while in orbit and reducing its overall albedo/intrinsic brightness as observed from the ground.

Starlink ground antennas

Prototypes of the Starlink user terminal antenna have been spotted alongside the other antennas at Starlink gateway locations in Boca Chica, Texas and Merrillan, Wisconsin.  These user terminals will be crucial to the success of the Starlink network.

SpaceX board member Steve Jurvetson recently tweeted that the company’s board had an opportunity to try out the user terminals at the company headquarters in Hawthorne.  The devices use a Power over Ethernet (PoE) cable for their power and data connection.  The antenna connects to a SpaceX branded router with Wi-Fi (802.a/b/g/n/ac, transmitting at 2.4 & 5GHz).  SpaceX is producing the antenna assemblies in-house while outsourcing production of the more common router component.

SpaceX continues to make progress setting up its network of gateways for the Starlink system. New gateways are being added in countries all over the world and will connect giant data servers to users through Starlink.

As of now, only higher latitudes are covered (between 44 and 52 degrees according to one source). However, SpaceX only needs 24 launches for global coverage. Given SpaceX’s current Starlink production and launch rate, Starlink will have global coverage by the middle of 2021.

The second shell will, when operational, provide service almost all over the world because Starlink V1.5 satellites will be visible from the north pole just over the horizon with a 70 degree inclination orbit at a 570 km altitude.

SpaceX is currently offering a beta version of the Starlink internet service, jokingly named the “Better Than Nothing Beta”. Users pay $500 for the Starlink terminal and router and then $99 per month for the service.

Invitations to participate in the beta were sent out to people who signed up through the official Starlink website and live in parts of the northern United States, southern Canada, and very recently the United Kingdom.

The results so far have been very promising, with SpaceX reporting speeds of 100mbps with 20-40ms latency, well below geostationary satellite latency. Many users have reported speed tests even higher than 100mbps.

The fourth shell is almost similar to Shell 1, but it will reinforce the effort to replace shell 1 satellites with the next generation Starlink V1.5 satellites. Shell 4 satellites can be retasked to replace missing Starlink V1.0 satellites in shell 1. All it will cost is a little ionized Krypton gas and an altitude adjustment from 540 kilometer to 550 kilometer.

Author Trevor Sesnic link

Coauthor/Text Retriever Johnny Nielsen

link to launch list


SpaceX - Eutelsat 36D

Screenshot from the launch of Eutelsat 36D. At last we get to see a normal GTO mission in daylight Mission Rundown: SpaceX Falcon 9 - Eutels...